Light: Place your Alocasia Jacklyn in medium to bright indirect light. Avoid direct sunlight as it can burn the leaves.

Watering: Water when the top few inches of soil are dry. Overwatering can lead to root rot, so ensure the soil is well-drained.

Humidity: This plant thrives in high humidity. Aim for at least 60% humidity. You can increase humidity by misting the plant or using a humidifier.

Temperature: Keep the temperature between 65-85F. Avoid exposing the plant to temperatures below 60F.

Soil: Use a chunky, well-draining soil mix. You can create your own mix with potting soil and amendments like perlite, vermiculite or orchid bark.

Fertilizer: Feed monthly during the growing season (spring and summer) with a balanced, diluted houseplant fertilizer.

Light: Bright, indirect light is ideal. Too much direct sunlight can scorch the leaves, while too little light can cause the plant to become leggy.

Watering: Keep the soil consistently moist but not soggy. Water when the top inch of soil feels dry. Be cautious of overwatering, as this can lead to root rot.

Humidity: Alocasia Polly loves hight humidity. If your home is dry, consider using a humidifier or placing the plant on a tray with water and pebbles.

Temperature: Maintain a warm environment, ideally between 65-80F. Avoid cold drafts and sudden temperature changes.

Soil: Use a well-draining, rich potting mix. Adding organic matter can help retain moisture without becoming waterlogged.

Fertilizer: Feed your plant with a balanced, water-soluble fertilizer every 2-4 weeks during the growing season (spring and summer). Reduce feeding in the fall and winter.

Pruning: Remove any yellow or damaged leaves to encourage new growth and maintain the plant's appearance.

Light: Bright indirect light is ideal, while it can tolerate lower light conditions, its growth my slow down.
Watering: Water thoroughly, then allow the top inch of soil to dry out before watering again. Be careful not to overwater, as this can lead to root rot. Reduce watering in the winter months when the plant's growth slows down.

Humidity: Ficus Alii prefers moderate humidity levels. If your home is dry, consider using a humidifier or placing a try of water near the plant.

Temperature: Keep it in a warm environment, ideally between 60F and 80F.

Fertilizing: Use a well-draining potting mix. You can add perlite or sand to improve drainage. Fertilize monthly during the growing season (summer and spring) with a balanced, water-soluble fertilizer.

Pruning: Prune to maintain shape and remove dead or yellowing leaves. Rotate the pot occasionally to ensure even growth.

Light: Bright indirect light is ideal. Place your Ficus Audrey near a south or west facing window where it can receive several hours of indirect sunlight.

Watering: Allow the top 2 to 3 inches of soil to dry between waterings. Water thoroughly when needed but avoid letting the soil dry out completely.

Humidity: Ficus Audrey prefers higher humidity levels but can tolerate normal indoor humidity.

Fertilizing: Light fertilization during the growing season can be beneficial.
Temperature: It enjoys warm temperatures between 70-95F.
Pruning: Regular pruning helps maintain size and shape. Dust the leaves regularly with a damp washcloth to ensure they can photosynthesize properly.

Light: Place your fiddle-leaf fig near a window where it can receive bright, indirect light. Avoid direct sunlight as it can burn the leaves.
Watering: Water your plant when the top inch of soil feels dry. Be careful not to overwater, as this can lead to root rot. During the growing season, keep the soil moderately moist but reduce watering in the winter.

Soil: Use a well-draining potting mix. A combination of peat-based soil with pertile or a mix of cactus and houseplant soil works well.

Humidity: Fiddle-leaf figs prefer higher humidity. If your home is dry, consider using a humidifier or placing a tray of water near the plant to increase humidity.

Temperature: Keep your plant in a warm environment, ideally 60-75F. Avoid placing it near drafts or sudden temperature changes.

Pruning: Trim any damage or dead leaves to keep the plant healthy. Regularly dust the leaves with a damp cloth to help with photosynthesis.

Fertilizing: Feed the fiddle-leaf fig with a balanced liquid fertilizer once a month during the growing season (spring and summer)

Light: Place your Hoya Compacta in bright, indirect light. It can tolerate some direct sunlight but too much will scorch the leaves.

Watering: Water deeply when the top 2-3 inches of soil are dry. Reduce watering in the winter.

Soil: Use a well-draining potting mix. Adding perlite or orchid bark can help improve drainage.

Humidity: Maintain a humidity level between 40-60%. If the air is too dry, consider using a humidifier or placing the plant on a pebble tray.

Temperature: Keep the plant in a warm environment, ideally above 50F. Avoid sudden temperature changes.

Fertilizing: Fertilize every couple of months during the growing season (spring and summer) with a balanced, water-soluble fertilizer.

Pruning: Prune lightly in the spring to encourage bushier growth.

Light: Bright, indirect light is ideal. Too much direct sunlight can scorch the leaves, while too little can slow the growth and cause yellowing.

Watering: Water when the top inch of soil is dry. Ensure thorough watering until water flows out of the drainage holes but avoid letting the plant sit in excess water. Reduce watering in fall and winter when the plant's growths slows.

Temperature: Optimal temperature range is between 65-80F. Avoid placing the plant near drafts or sudden temperature changes.

Humidity: Prefers high humidity. You can increase humidity by misting the leaves, placing the plant on a pebble tray with water or by using a humidifier.

Soil: Use a well-draining potting mix, ideally one high in peat moss.

Fertilizer: Fertilize monthly during the growing season (spring and summer) with a balanced, water-soluble fertilizer.

Light: Monsteras prefer bight, indirect sunlight. Too much direct sunlight can burn the leaves, while too little can slow growth. Place your Monstera near a window with filtered light. They can tolerate low light but will grow more slowly.

Water: Water your Monstera when the top 2 inches of soil are dry. Overwatering can lead to root rot, so it's important to let the soil dry out a little between waterings. Yellow, brown or black leaf tips can indicate overwatering, If this happens, stop watering, drain excess water and let the soil dry out.

Temperature: Keep your Monstera in a warm environment, ideally between 65-85F.

Humidity: Monsteras thrive in high humidity. If your home is dry, consider a humidifier or placing a tray of water near the plant.

Soil: Use well-draining soil, ideally a mix of indoor houseplant soil, perlite and shredded bark. This helps with aeration and drainage. Monstera plants prefer slightly acidic to neutral soil.

Fertilizing: Fertilize your Monstera every 3-4 months with a balanced houseplant fertilizer.

Pruning: Trim any yellow or damaged leaves to encourage healthy growth.

Light: Bright, Indirect light is ideal. It can tolerate medium light but avoid direct sunlight as it can burn the leaves.

Watering: Water when the top couple of inches of soil are dry. Overwatering can lead to root rot, so its better to let the soil dry out between waterings. Ensure the pot has good drainage to prevent water from sitting at the bottom.

Temperature: Prefers temperatures between 60-75F.

Humidity: While it can tolerate lower humidity, it thrives in a m ore humid environment. Misting the leaves occasionally can help.

Soil: Use a well-draining, rich organic mix. Avoid wet, murky or dry, sandy soils.

Fertilization: Fertilize monthly during the growing season (spring and summer) with a balanced liquid fertilizer.

Pruning: Prune any leggy growth to encourage a bushier appearance. The best time to prune is before a regular fertilizer dose.

Light: Bright, indirect light is ideal. Avoid direct sunlight as it can scorch the leaves.

Watering: Allow the 2-3 inches of soil to dry out between waterings. Overwatering can lead to root rot.

Soil: Use a well-draining, airy potting mix. A mixture designed for aroids and soilless mix works well.

Temperature: Maintain temperatures between 55-85F.

Humidity: Maintain humidity levels of 30-60%

Fertilizing: Feed monthly with a diluted liquid fertilizer to support its variegation and growth.

Light: Bright, indirect sunlight is ideal. Avoid direct sunlight as it can scorch the leaves.

Watering: Water when the top 2 inches of the soil are dry. Ensure the soil is well-draining to prevent root rot. During winter reduce watering frequency as the soil retains moisture longer.

Humidity: Prefers high humidity levels (60-80%). You can use a humidifier or place a tray of water near the plant to maintain humidity.

Temperature: Thrives in temperatures between 59-86F. Keep it away from cold drafts.

Soil: Use a well-draining soil mix rich in organic matter. A mix of peat or coconut coir with added perlite or sand works well.

Fertilizer: Feed lightly with a balanced liquid fertilizer during the growing season (spring and summer).

Propagation: Can be propagated through stem cuttings or air layering,

Light: Bright, indirect light is ideal. While Neon Pothos can tolerate low light, their leaves will be more vibrant in brighter conditions.
Watering: Allow the top 2-3 Inches of soil to dry out between waterings. Overwatering can lead to root rot, so ensure the pot has good drainage.

Humidity: Average household humidity is usually sufficient, but higher humidity can encourage more vigorous growth.

Temperature: Keep the plant temperatures between 65-85F.

Soil: Use well-draining soil. A mix of houseplant soil, perlite and orchid bark can create a chunky, organic mix that Neon Pothos love.

Fertilizer: Fertilize monthly during the growing season (spring and summer) with a balanced liquid fertilizer to encourage healthy growth.

Light: Bright, indirect light is ideal for maintaining the plant's beautiful variegation. It an tolerate low light, but the variegation may fade and the plant could become leggy.

Watering: Allow the top 2-3 inches of soil to dry out between waterings. Overwatering can lead to root rot, so ensure the pot has good drainage.

Temperature: Aim for temperatures between 65-85F.

Humidity: Pothos N' Joy thrives in high humidity and high temperatures similar to its native tropical environment.

Soil: Use an airy, well-drained soil mix. A combination of indoor potting soil, perlite, and orchid bark works well.

Fertilizer: Feed your plant with a balanced, water soluble fertilizer every 4-6 weeks during the growing season (spring and summer).

Pruning: Prune to maintain the desired shape and encourage bushier growth. You can propagate cuttings in water or directly in soil.

Light: Medium to bright indirect light is ideal. Avoid direct sunlight as it can scorch the leaves.

Watering: Water when the top 2-3 inches of soil are dry. The plant is relatively drought-tolerant, so don't worry if you occasionally miss a watering.

Temperature: Keep the plant in a temperature range of 65-75F.
Humidity: It thrives in standard household humidity but appreciates extra humidity for vigorous growth.

Soil: Use a well-draining soil mix. A mix of potting soil, perlite, and orchid bark works well.

Fertilizing: Fertilize once a month during the growing season, with a balanced liquid fertilizer.

Light: Bright, indirect light is ideal. While it can tolerate low light, the variegation will be more pronounced with more light. Avoid direct sunlight as it can scorch the leaves.

Water: Water thoroughly when the top 1-2 inches of soil are dry. It's important to let the soil dry out between waterings to prevent root rot. During winter, reduce watering frequency as the plant's growth slows down.

Temperature: Prefers temperatures between 65-85F.

Humidity: Enjoys moderate to high humidity. If your home is dry, consider using a humidifier or placing the plant on a tray with water and pebbles.

Soil: Use a well-draining potting mix. A mix of 1/3 perlite and 2/3 indoor potting soil works well.

Fertilizer: Fertilize lightly during the growing season (spring and summer) with a balanced, water-soluble fertilizer.

Pruning: Prune occasionally to maintain a full, bushy appearance and remove any leggy growth.

Light: Bright, indirect light is ideal. Rubber trees can tolerate some morning sunlight but should be kept out of harsh, direct afternoon sun to avoid leaf burn.
Watering: Water when the top 2 inches of soil are dry. Overwatering can lead to root rot, so ensure that the soil is moist but not soggy.

Humidity: Average room humidity is usually sufficient, but they appreciate a bit more humidity. You can mist the leaves occasionally or use a humidifier.

Soil: Use a well-draining potting mix. A mixed designed for houseplants or a blend of peat, pine bark and perlite works well.

Fertilizing: Feed every two to four weeks during the growing season (spring and summer) with a balanced liquid fertilizer.

Pruning: Prune to maintain the desired shape and remove any dead or damaged leaves, this also encourages bushier growth.

Light: Bright, indirect light is essential to maintain the vibrant variegation of the leaves. Avoid direct sunlight as it can scorch the leaves.

Watering: Keep the soil evenly moist but not soggy. Water when the top inch of soil feels dry. Avoid letting the soil dry out completely.

Temperature: The ideal temperature range is 60-80F.

Humidity: While it can adapt to average indoor humidity, it prefers a slightly more humid environment.

Soil: Use rich, well-draining soil. A mix of potting soil with added perlite or sand works well to ensure good drainage.

Fertilizing: Feed your plant with a balanced liquid fertilizer monthly during the growing season (spring and summer)

Light: Place in bright, indirect light. Avoid direct sunlight as it can scorch the leaves.

Watering: Water when the top inch of soil feels dry. Ensure the pot has good drainage to prevent waterlogging.

Temperature: Keep the room temperature between 60-75F.

Humidity: Average indoor humidity is fine, but it appreciates a bit more humidity if possible.

Soil: Use a well-draining potting mix. Preferably slightly acidic.

Fertilizing: Feed lightly every few weeks during the growing season (spring and summer).

Light: Bright, indirect light. They can tolerate low light conditions, but it will slow growth. Avoid prolonged direct sunlight, which can scorch the leaves.

Watering: Water when the soil is completely dry (2-6 weeks depending on the environment). Water in the winter approx once a month. Over watering can lead to root rot, Ensure the pot has good drainage.
Temperature: Optimal range is 70-90F, keep above 50F to avoid damage.

Humidity: Average household humidity is sufficient.

Soil: Well-draining soil, such as a cactus or succulent mix works best. Avoid heavy, peat-based soils that retain too much moisture.

Fertilizer: Balanced, slow-release fertilizer is the best type, preferably 10-10-10. Fertilize once in spring and once in summer, avoid fertilizing in winter.

Light: Place your Swiss cheese plant in bright, indirect light. Avoid direct sunlight as it can scorch the leaves.

Watering: Water the plant when the top inch of soil is dry. Ensure the soil is moist but not waterlogged. A well-draining pot is essential.

Humidity: This plant thrives in high humidity. Mist theleaves regularly or use a humidifier to maintain humidity levels above 50%.

Temperature: Keep the plant in a warm environment, ideally between 60°F and 85°F1.

Soil: Use a peat-based potting mix that retains moisture without becoming waterlogged. Aim for a soil pH between 5.5 and 71.

Support: Add a stake or moss pole to the pot to support the plant as it grows.

Fertilizing: Feed the plant with a balanced houseplant fertilizer once a month during the growing season.

Pruning: Prune lightly and regularly to maintain the desired shape and size.

Light: Adaptable to various light conditions, ZZ plants thrive in bright, indirect light but can also tolerate low light and fluorescent lighting. Avoid direct sunlight as it can scorch the leaves.

Water: Drought-tolerant, allow the soil to dry out completely between waterings. Overwatering can lead to root rot.
Temperature/Humidity: ZZ Plants do well in typical indoor temperatures (60-75F) and humidity levels. Protect the plant from temperatures below 45F.
Soil: Use a standard houseplant potting mix that drains well.
Fertilizer: Minimal feeding required, feed once in spring and once in the summer with a balanced liquid fertilizer.